Vinyl
How to Clean and Care for Your Vinyl Records
Brush loose dust before play. Wet-clean fingerprints or stuck-on dirt, remove the dirty fluid, and let the record dry completely before sleeving it.
Editorial byline
Audio and home theater. TunedRoom covers audio connections, home theater setup and listening systems, with guides organized around the signal path.
24 stories on the bill
Vinyl
Brush loose dust before play. Wet-clean fingerprints or stuck-on dirt, remove the dirty fluid, and let the record dry completely before sleeving it.
Speakers
Connect a mic to a powered speaker’s MIC input, or use a preamp or receiver for LINE or AUX. Start at low volume and listen for clear speech.
Speakers
Get center channel speaker placement right with a spot close to the screen, a flush furniture edge and an angle aimed at your seated ears.
Home Theater
Start with your Sonos Sub on the floor near its paired speaker. Compare practical spots from your seat and keep the one with clear, even bass.
Vinyl
To connect a turntable to speakers, check whether they're powered or passive, then make sure the record passes through exactly one phono stage.
Home Theater
Start with a spot that fits your room, listen from your main seat, and use the subwoofer crawl if the bass sounds boomy or weak.
Speakers
Measure your room and listening seat, calculate labeled starting marks for your layout, then test them before moving furniture or cutting the ceiling.
Speakers
Unplug the receiver, run one cable to each passive speaker, match positive and negative at both ends, then test left and right at low volume.
Speakers
Find the connection your Sony speaker supports, then pair it with your phone, computer or TV, or use its wired input.
Speakers
For 5.1 surround sound, place the front speakers around the screen and the surround pair beside or slightly behind your seat. Test, then calibrate.
Home Theater
Connect a powered subwoofer from your receiver’s Sub Out to its LFE input with one RCA cable. A passive subwoofer needs an amplifier in between.
Headphones
If your Bluetooth headphones keep disconnecting, play downloaded audio with the phone close, then try another device to narrow down the cause.
Speakers
An iPhone speaker can crackle from blockage, moisture, loud playback, an app, a call connection or damage. Compare sounds to find the cause.
Speakers
To fix Mac speaker crackling, compare playback across apps and outputs, check Sound settings, then use the right diagnostic path if it persists.
TV and Soundbars
Reset a Samsung soundbar by matching its controls to the right method, then check for INIT or its LED confirmation before restoring sound.
Speakers
To connect Bose speakers, first match your model to Bluetooth, app setup or a TV cable. The steps change if you want two speakers to play together.
Home Theater
For optimal subwoofer placement, compare the front wall, a corner and any workable sofa-side spot, then listen from every seat you use.
Home Theater
Your Epson projector is on but isn't getting usable video. Select the connected input, wake the source, then reseat the cable at both ends.
Vinyl
Stop playback, unplug the turntable, then brush the stylus gently from rear to front. Replace it if the tip or its support is bent or broken.
Headphones
Muffled sound can come from blocked mesh, poor fit, a connection, or a sound setting. Compare where the change happens before replacing them.
Home Theater
Not sure where to place a subwoofer? Compare a front-wall spot and a corner from every seat you use, then recalibrate.
Vinyl
If your record player is not spinning, check power and the start control first. Then use its drive type and what the platter does to choose the next check.
TV and Soundbars
Connect the TV's audio output to a matching input on powered speakers or a soundbar. Passive speakers need an amplifier between them and the TV.
Streaming and Connections
Connect multiple Bluetooth speakers through a shared linking mode, a source with dual output, AirPlay, Auracast or a two-output transmitter.