News
NAD Unveils C 359S With BluOS and C 569 CD Player
NAD introduces the C 359S Integrated Amplifier with BluOS and HDMI eARC, plus the C 569 CD Player, which is scheduled for late November.
On this stage
Home Theater
Receivers, subwoofers, channels, and room setup.
Start here
View all in Home TheaterFix
View allExplain
View allThe full set list
News
LG Sound Suite Adds Support for Two W7 Subwoofers
LG Sound Suite adds dual W7 subwoofer configurations, while the H7 soundbar gains DTS:X and Google Cast through software updates.
Home Theater
What Should My Subwoofer Crossover Be Set To?
Start your subwoofer crossover at 80 Hz for most home systems. Use the receiver’s speaker setting if it manages bass, then listen for an even blend.
News
Yamaha R200A Adds Phono and Bluetooth Multipoint for $299.95 MSRP
Yamaha’s R200A arrives in November at $299.95 MSRP, with a phono input, Bluetooth Multipoint and 100 watts per channel at 8 ohms for stereo setups.
Home Theater
Should a Subwoofer's Phase Be 0 or 180?
Start subwoofer phase at 0°, then compare it with 180° from your seat while the main speakers play. Keep the setting with fuller, smoother bass.
News
Kygo Tour Uses Sennheiser Spectera for In-Ear Monitoring
Sennheiser reports that Kygo's outdoor show in Germany used Spectera for in-ear monitoring, with 24 bodypacks and a 1U base station.
Home Theater
Why Is There Low Volume or No Sound From My Home Theater Speakers?
Low volume or no sound from home theater speakers? Check the source, speaker output and connections on a receiver or soundbar before arranging service.
Home Theater
Why Is My Epson Projector Not Turning On?
If your Epson projector won’t turn on, test the outlet and cord, then read its lights. A warning that returns after the applicable owner checks, including a permitted lamp replacement, needs service.
Home Theater
Sonos Subwoofer Placement
Start with your Sonos Sub on the floor near its paired speaker. Compare practical spots from your seat and keep the one with clear, even bass.
Home Theater
Subwoofer Placement Tips
Start with a spot that fits your room, listen from your main seat, and use the subwoofer crawl if the bass sounds boomy or weak.
Home Theater
How to Connect a Subwoofer
Connect a powered subwoofer from your receiver’s Sub Out to its LFE input with one RCA cable. A passive subwoofer needs an amplifier in between.
Home Theater
Optimal Subwoofer Placement
For optimal subwoofer placement, compare the front wall, a corner and any workable sofa-side spot, then listen from every seat you use.
Home Theater
Why Does My Epson Projector Say No Signal?
Your Epson projector is on but isn't getting usable video. Select the connected input, wake the source, then reseat the cable at both ends.
Home Theater
Where to Place a Subwoofer
Not sure where to place a subwoofer? Compare a front-wall spot and a corner from every seat you use, then recalibrate.
