Amazon Fire TV Soundbar Plus at $189.99 for TV Audio
A 3.1 all-in-one soundbar with Dolby Atmos and DTS:X that brings clearer dialogue and built-in bass to a flat screen without a separate subwoofer.
TunedRoom
New guides, news and deals, in publication order.
A 3.1 all-in-one soundbar with Dolby Atmos and DTS:X that brings clearer dialogue and built-in bass to a flat screen without a separate subwoofer.
Apple's AirPods 5 offer open-ear ANC for $129 in the U.S. A $149 version adds wireless charging and volume swipes. Stores are due to get them September 18.
Use a speaker placement calculator to plan coverage, speaker count and sound levels. Here's how Yamaha CISSCA's layouts and two modes work.
Learn how to wire speakers with bare wire, match red and black terminals, and check Polk Audio Monitor XT20 amplifier compatibility and connections.
How to connect Sony speakers, shown on the SRS-XB100. Charge it first, follow the blue light, or link two XB100s as a Stereo Pair.
Where to put surround speakers in a 5.1 setup, from the center speaker to the sub, and how to test every channel from your seat.
Hook up a subwoofer with one RCA cable from a receiver's sub out, or use the sub's own speaker-level inputs when your stereo amp has no sub out.
If your Bluetooth headphones keep disconnecting, first work out whether the sound skips, pauses or cuts off completely. Each has its own fix.
If your iPhone speaker is crackling, dry it if it got wet, clean the speaker openings, then compare an alert with a speakerphone call before booking a repair.
MacBook speaker crackling? Follow Apple's sound checks for recent Apple silicon laptops, with an M4 Air example and the direct diagnostics requirements.
To reset a Samsung soundbar, try the power and TV-output checks first, since a reset wipes your settings. Here's each step on an HW-Q600C.
To connect Bose speakers, put the speaker in pairing mode and pick it in your phone's Bluetooth settings. Here's each step on a SoundLink Flex 2.
Start your subwoofer near the front speakers, compare a corner, then do the subwoofer crawl to find the best spot for your seat.
Epson projector showing No Signal? Check the input, your laptop's display output and the HDMI cable, with the Home Cinema 1080 as the worked example.
To clean the stylus on an Audio-Technica AT-LP60-BT, use a soft brush from rear to front only, with the tonearm at rest and the turntable unplugged.
Headphones sound muffled? Start with when it happens. A call, one quieter earbud or a moved cable each points to a different check.
Compare a front-wall spot and a front corner for your subwoofer from each seat you use. Keep the one with the fewest booming or missing notes, then recalibrate.
If your record player is not spinning, check the power and start controls, then the belt, with steps for the AT-LP60X, AT-LP120XUSB, Fluance and RR75.
Connect speakers to a TV by matching the ports, adding an amplifier for passive speakers, and choosing which remote will run the volume.
To connect multiple Bluetooth speakers, pairing isn't enough. Pick both outputs on a phone that supports it, or link the speakers, then check the stereo rules.
To connect JBL speakers, get one playing from your phone first, then link the second through a system both models share. Stereo comes last.